Speed News vol. 1 Issue 4-May : Page 16
NE W PRODUC TS DAYSTAR PRO MOUNT The Pro Mount from Daystar allows you to attach a GoPro or other POV action camera securely to tubular rollcages. Fitting 0.875in., 1.5in., 1.75in. and 2in. tubing, the Pro Mount features Kevlar-infused polyurethane spacers designed to dampen vibration without scratching any fi nish and aluminum hardware. For more information visit www.daystarweb.com CORSA CAMARO CAT-BACK EXHAUST Featuring a straight-through, 2.5-inch nonrestrictive design, Corsa claims an airfl ow of 44 percent over stock for its new dual-rear-exit Camaro cat-back exhaust system. Corsa says the system will provide an average power increase of 6hp and a torque increase of 7 ft.-lbs. It features the company’s Refl ective Sound Cancellation technology that is designed to reduce drone. The kit includes the X pipe, hardware and instructions for bolt-on installation. For more information visit www.corsaperformance.com 16
New Products
Daystar Pro Mount<br /> The Pro Mount from Daystar allows you to attach a GoPro or other POV action camera securely to tubular rollcages. Fitting 0.875in., 1.5in., 1.75in. and 2in. tubing, the Pro Mount features Kevlar-infused polyurethane spacers designed to dampen vibration without scratching any finish and aluminum hardware. <br /> <br /> For more information visit <br /> www.daystarweb.com<br /> <br /> Corsa Camaro Cat-Back Exhaust<br /> Featuring a straight-through, 2.5-inch nonrestrictive design, Corsa claims an airflow of 44 percent over stock for its new dual-rear-exit Camaro cat-back exhaust system. Corsa says the system will provide an average power increase of 6hp and a torque increase of 7 ft.-lbs. It features the company’s Reflective Sound Cancellation technology that is designed to reduce drone. The kit includes the X pipe, hardware and instructions for bolt-on installation.<br /> <br /> For more information visit <br /> www.corsaperformance.com<br /> <br /> Classic Tube Triple Bender<br /> Bending steel brake or fuel lines by hand is both tough and likely to produce weak spots in the tube. To do the job properly, you need a tube bender. Classic Tube’s Triple Bender features three bending grooves for bending tubes up to 90 degrees in 15-degree increments. It will handle 1/4, 3/16, 5/16 or 3/8 inch tubing and can handle left- and right-hand bends. <br /> <br /> For more information visit <br /> www.classictube.com<br /> <br /> Maradyne Mach One Fans<br /> For small block engines, including ’60s and ’70s Mustangs and the Fox body cars, Maradyne offers its Mach One series of fans. A shrouded high-performance fan, it’s 16in. wide by 17in. high and 3.9in. deep. It features a 225-watt motor delivering 2,160 CFM. Maradyne says the motor is dustproof and waterproof, and the fans are dynamically balanced for smooth operation and longer life. <br /> <br /> For more information visit <br /> www.maradyne.com<br /> <br /> 2013 SRT Viper<br /> The Chrysler company’s rapid snake returns, this time with 640hp from its 8.4-liter V10 engine. Branded under Street and Racing Technology, Chrysler’s performance arm, the fifth generation of the Viper claims a 50 percent improvement in chassis stiffness, and uses aluminum and carbon fiber for its skin. The Viper will come in two models, with the GTS featuring more technology such as two-mode active suspension to allow it to find new limits on the track. <br /> <br /> For more information visit <br /> http://www.drivesrt.com/srt-viper/<br /> <br /> Camaro Intake kit<br /> Spectre Performance has introduced an all-new ProFab Cold Air Intake for the 2010 Camaro. The sweeping high-flow intake tube is topped with a Spectre high-flow cotton-gauze hpR Filter. The ProFab Intake uses a mandrel-bent polished aluminum intake tube designed to smooth, straighten, and increase airflow, and a laser-cut steel heat shield to block underhood radiant heat. There is a machined slot for the factory MAF sensor, and all necessary brackets, hardware, and complete instructions are included.<br /> <br /> For more information visit <br /> www.SpeedbySpectre.com <br /> <br /> K&N Inline Fuel Filters<br /> Using stainless steel mesh inside an aluminum housing, K&N’s fuel/oil filters remove particles down to 25 microns. They can be used with a variety of oils and fuels, including methanol. The filters are available in a variety of fitting types and sizes.<br /> <br /> For more information visit <br /> www.knfilters.com<br /> <br /> <br /> Palmer Performance Engineering DashCommand<br /> Available for iOS, Android and Windows, DashCommand is designed for touchscreen devices and provides virtual dashboards and OBD-II data logging and diagnostics. It will also display real-time friction circle data using a device’s built-in accelerometer and compile course maps through GPS. The software communicates with a variety of wireless OBD-II interfaces to provide up-to-the-second data.<br /> <br /> For more information visit <br /> www.palmerperformance.com<br /> <br /> <br /> Have a product?<br /> Do you have a product you’d like to see featured in Speed News? Tell us about it at SpeedNewsEditor@drivenasa.com. Include all the relevant information along with a high-resolution image. <br />
Publication List
Using a screen reader? Click Here